All Things Oil Tanks

Below, is a brief guide to oil tanks. From price to size to oil regulations Abbey Boilers has the experience and the expertise to answer all your questions. 

The tanks themselves:

Oil tanks can be installed inside, outside, or underground. Heating oil tanks are made of fabricated steel or plastic. Both of which can be integrally bunded (tank has two layers)  or single skinned. Integrally bunded tanks are made of one tank inside another. The outside one housing the main tank's fittings and vents. This type of tank tends to offer better protection than the single skinned tanks because there is more room between the two layers to prevent oil leaking externally. 

The essentials:

Most single skinned tanks need to have a bund built around them for protection. However, the necessity of this is dependent on where you live and the position of your tank. The bund is designed to hold up to 110% of your tank's contents in order to avoid spillages. 

Checking your tank:

OFTEC (the Oil Firing Technical Association) recommend you look over your tank weekly, for any cracks, bulges or rust, which may allow fuel to leak and damage the surrounding environment. 

Nonetheless, it is also important to get a qualified oil engineer to inspect your tank annually. Abbey Boilers inspects your oil tank as part of your annual service for just £72.  It is also recommended to do this if you have recently moved into a new property with an oil tank. 

Furthermore, steel tanks have an oil-resistant coating. this coating needs maintaining in order to prolong the life of the tank. It is best to check with the manufacturers to find out what kind of maintenance your tank needs besides its annual service.  

Buying your oil tank:

It is essential for your safety and the safety of the wildlife and the environment that you get an oil tank that is OFTEC approved and fitted by an OFTEC registered engineer. 

Abbey Boilers both supplies and fits oil tanks. Click here to contact us for more information about the type of tank you should have and where it should be placed in order to meet oil tank regulations. 

Tanks vary in size depending on your requirements. They can hold between 1,000 to over 3,500 litres (although the larger tanks tend to be for commercial use). The prices of the tanks generally vary between £500 to £2000. 

All about the oil:

The amount of oil you will need is hugely determined by different factors including:

  • The size of your house
  • How long and often you have your heating on 
  • How efficient your boiler is

The best way to ascertain how much oil you are using is to monitor the gauge on the tank over a period of time. 

There is usually a gauge of some type on your heating oil tank. It could be on the tank, next to the tank or displayed remotely. However, sometimes this is not the case, you can buy a gauge for anything between £25 for a basic gauge, to over £80 for a digital remote one.  It's crucial you monitor your oil levels so they do not get too low.  Make sure you order before it becomes less than a quarter full, especially in winter.  It's worth noting that you only need to fill your tank to around 80-90% of its capacity to avoid spillages. 

 

Get in touch with Abbey Boilers to find out more about Oil tanks, Oil services and how to maintain your oil heating system.